7 Ideas to Lower Your Heating Bill in Clearwater This Winter

Your residence is likely one of your most precious investments. It assists you financially through improving equity, and it’s an area to enjoy with your family and develop memories, too. During the winter, you could also face growing utility costs.

As a consequence, finding approaches to lower your heating bill in Clearwater without giving up comfort can seem difficult.

When it comes to energy efficiency, homes are similar to motor vehicles. Some guzzle energy while others sip it gradually. Regardless of what kind of house you own, there are steps to stop the chill this winter. The Experts are here with seven tips to keep your family comfy without going over budget.

  1. Get a New Your Air Filter
  2. It’s the most economical recommendation that exists. It’s also the best way to keep your heater operating properly through the winter.

    The kind of filter and seasonal factors affect how regularly you should replace it. Soaring allergen counts, pets and house size can also affect its life span. Typically, low-priced filters should be replaced every month. Pleated ones made with higher-quality material could work for three months or longer.

    “It’s really the big thing folks forget about,” said Jim Hughes, senior manager of education and training at Service Experts. “The more loaded up the filter is, the less air is able to go through it and actually add warmth to the residence. An overloaded filter makes your furnace work harder.”

  3. Schedule Routine HVAC Service
  4. It’s common to have a technician visit your residence in the spring for AC service. That way, your air conditioner is prepped for the warm weather.

    But don’t forget to schedule an appointment for furnace service before it gets cold too.

    Among other actions, an inspection typically includes:

    • Examining thermostat settings
    • Cleaning and oiling internal pieces
    • Examining system shutdown and startup processes

    Regular service helps lower the likelihood of handling an emergency repair in the middle of winter. Some reports have indicated as many as 75% of “no heat” calls could have been avoided with regular service.

  5. Inspect Windows and Doors for Leaks
  6. Windows and doors are a primary entry point for cold air. Caulking window and door frames is an economical approach to help keep cold air out.

    Here’s one check that Hughes suggests.

    Latch a door. Is any light visible? If that’s what’s happening, it’s not fully sealed. Modifications or weather-stripping might be necessary.

    If your home has single-pane windows, you may want to consider a dual-pane improvement.

    A lot of homeowners insulate single-pane windows with plastic sheeting.

    It’s not a bad solution, but dual-pane windows provide enhanced insulation for keeping cold air out.

    When you add double-pane windows, your energy savings could be 25% or higher.

  7. Restrict Use of Vented Appliances
  8. If you require the exhaust fan during cooking, Hughes recommends against leaving it on for too long.

    The same goes for for the dryer. Don’t allow it to operate after your clothes are ready.

    Any venting appliance or exhaust fan pulls out heated air out and increases cold air. Using these appliances all the time will require your HVAC system to work harder to battle the unnecessary coldness.

  9. Check Your Home’s Outer Edges for Cracks
  10. Check your residence’s perimeter. This is the barrier that shields your house from the outside. If your home has a basement, be on the lookout for fluttering cobwebs or chilly air flowing in close by the sides.

    Polyurethane sealant and other options can be bought to fix basement walls allowing air into your home. Another economical idea is to add foam seals for fixture undersides, like ceiling fans, overhead lights or wall outlets.

    They’re simple to use and are awesome at stopping cold air in the winter.

  11. Measure Insulation Levels in Your Attic
  12. It’s worth confirming that you have appropriate insulation levels in your attic as well. Nine in 10 U.S. houses have insufficient insulation, according to the North American Insulation Manufacturers Association.

    Hughes recommends checking the ENERGY STAR® zone map to determine the recommended R-value for your home’s walls and attic space. This suggestion is established on the geographic spot where you live.

  13. Think About Our Advantage Program™
  14. Winter might be tough for homeowners with aging units.

    If your furnace is malfunctioning or needing major fixes, there’s a good chance you’re not ready to spend thousands on a new system.

    That’s why we provide our Advantage Program. It helps homeowners like you prevent expensive fixes through a modest monthly fee.

    We’ll also install an energy-efficient system in your residence. Plus our Expert technicians will repair and maintain it for you without any extra out-of-pocket cost

Request an Appointment with Us Right Away

Make your Clearwater residence more energy efficient with Expert support from Midway Services.

For more information about our Advantage Program or to schedule an appointment for HVAC service, call us at 727-219-2471 or contact us online now.

Contact Us